Posts by [BOINC@Poland]goofyx

1) Message boards : Number crunching : testing forum (Message 2645)
Posted 28 May 2018 by Profile [BOINC@Poland]goofyx
Post:
posting test message.

I can still see the original post from goofyx: 28 May 2018, 11:21:43 UTC

so.. forum looks ok :)
anti-spam won't mess any more.
2) Message boards : Number crunching : testing forum (Message 2642)
Posted 28 May 2018 by Profile [BOINC@Poland]goofyx
Post:
thank you....
which Christmas it will be ?
3) Message boards : Number crunching : testing forum (Message 2640)
Posted 28 May 2018 by Profile [BOINC@Poland]goofyx
Post:
I have some issue about posting on this forum.
After 2-3 hours new post are deleting ?
anti-spam scripts are disabled.

please write some test post on this thread to check it.
4) Message boards : Number crunching : exporting stats (Message 2628)
Posted 17 May 2018 by Profile [BOINC@Poland]goofyx
Post:
There is something VERY WRONG with the STATS for BOTH GG NCI & CPU....
See http://nci.goofyxgridathome.net/forum_thread.php?id=291&postid=2605

i have the same problem from 1 month <- php stops working with relative path and can't create stats, WUs ect
5) Message boards : Number crunching : exporting stats (Message 2627)
Posted 17 May 2018 by Profile [BOINC@Poland]goofyx
Post:
There is something VERY WRONG with the STATS for BOTH GG NCI & CPU....
See http://nci.goofyxgridathome.net/forum_thread.php?id=291&postid=2605

i have the same problem from 1mount <- php stops working with relative path and can't create stats, WUs ect
6) Message boards : News : Maintance break (Message 2626)
Posted 17 May 2018 by Profile [BOINC@Poland]goofyx
Post:
I am glad that the servers are up again. I guess that the experiment 'two projects-one piece of hardware' went wrong...

it's propably not it.
I can handle with many project on one hardware without problem right now, but I still have NO IDEA why my PHP can't handle with relatives path.
Now I edited files to change relatives path to full path to generate some test WUs, but this is no solution because if I will update boinc server I will loose my changes.
7) Message boards : Number crunching : exporting stats (Message 2614)
Posted 25 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
ok, somethink is going to move forward.
some stats are exported right now <- i will check rest of it tonight
8) Message boards : Number crunching : Project not visible in SETIBZH / Formula Boinc (Message 2612)
Posted 25 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
Thank you for answers.
Here the answer about BZH:
http://formula-boinc.org/forum/viewtopic.php?f=14&t=100
I don't know what SBZH or BZH mean but am guessing you are referring to https://statsbzh.boinc-af.org/ ?
This is just a local stats site which the admin here has no control over.
To Admin. why not generate it ?

Not sure what you are asking for !

By the way my first valid WUis from 24april 10:42 (UTC) on 25 april 0515 (utc) my results still not appears in Boinc stats also not on Free-DC.
I will wait one more day (time for replication between servers).

As already posted on the NCI site http://nci.goofyxgridathome.net/forum_thread.php?id=291 and the CPU site http://cpu.goofyxgridathome.net/forum_thread.php?id=291 the admin is still working on getting the stats working again. They haven't updated locally since the 19th April, you can see details here http://nci.goofyxgridathome.net/stats/ and here http://cpu.goofyxgridathome.net/stats/

Anyone know why c++ programs can't handle with relative path (../db_dump_spec.xml) on XFS and gives "segmentation fault" because of it (i think so)?
I am trying to find solution on google but without any working solution.
9) Message boards : Number crunching : Any idea when the server is going to be stable again? (Message 2609)
Posted 24 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
so far, so good!

what happend to stats export?

i have problems with using relative path by boinc apllication
10) Message boards : Number crunching : Project not visible in SETIBZH / Formula Boinc (Message 2607)
Posted 24 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
Why is the project not visible in Formula Boinc who is reachable via SBZH ?
http://formula-boinc.org/
Not visible in "marathon" also not in "sprint"

i don't know.
maybe because i didn't start generate new stats?
11) Message boards : Number crunching : Any idea when the server is going to be stable again? (Message 2602)
Posted 24 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
any idea when the project will get back to normal?

I am fully sure about it, but at this moment both project working together more than 1 hour without a problem <- it's best result during last week.
There is a light on the end of my tunnel :D
12) Message boards : Number crunching : Any idea when the server is going to be stable again? (Message 2601)
Posted 24 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
http://nci.goofyxgridathome.net/forum_thread.php?id=291
13) Message boards : Number crunching : Any idea when the server is going to be stable again? (Message 2600)
Posted 23 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
database is too big for mysql on debian? 18GB right now


If your 64-bit debian has a later kernel than 2.4 and works with a XFS on LVM2 file system and you use the InnoDB engine of MySQL
a single table can be multiple terabytes or petabytes, even.

According to MySQL gurus the amount of RAM in your server is far more of a limiting factor than the constraints that MySQL puts on you

My database are on EXT4 partition right now.
XFS system store /home/boincadm directory


I am seting up next stress-ng testing to check stability for hardware <- but result from it is always good.
When I started GG@h CPU, after 1-2 hours server is out and sometimes even hardware restarted <- system logs don't tell anythink usefull.
Look like even after reinstall system i have problem with ext4 system partition which goes wrong and remount as read only
14) Message boards : Number crunching : Any idea when the server is going to be stable again? (Message 2597)
Posted 21 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
even after reinstall full system and recovery database from back up I have the same problem.
after some hours of good working for CPU project mysql/disc start to be creazy and kill server

i try to install system and project on other SSD disc and situation is the same <- i even try to install fresh system on HDD disk and is the same...
to be honest... i have no futher idea whats goin on :( <- database is too big for mysql on debian? 18GB right now, but i try it on MariaDB and with the same problems.


maybe anyone have some idea?
15) Message boards : Number crunching : Any idea when the server is going to be stable again? (Message 2596)
Posted 21 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
to be honest... I don't know.
At this moment situation is that:
1. I have both project NCI and CPU on one hardware server,
2. deamons is working <- but for gg@h CPU feeder has sometimes problem with shmem and kill itself
3. every other application like update_stat, db_dump ect give me "Segmentation fault" error <- i tryed to recompile it on new server, but after it this errors still exists.
4. most of application has problems with relative path and give me
"mkdir() failed; Not connected" 

error.
For example:
"[CRITICAL] boinc_mkdir(../html/stats_tmp): mkdir() failed; Not connected"
16) Message boards : News : Maintance break (Message 252)
Posted 16 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
two boinc project don't won't to work on one hardware :( <- i try t run NCI and CPU on my new server.
I spend 30 hour on testing and changing many think (deamons name, config files ect).
When I started two projects at the same time deamons start to kill each other <- this is strange because thay have different name, different PID, different database connection and difference home directory :(
I even try to run two project on two different user (boincadmNCI, boincadmCPU) but even then projects kill each other.
Of course I use different share memory address for feeder.

At this moment I restore old CPU <- so i will have to reinstall it as single projct
17) Message boards : News : Maintance break (Message 249)
Posted 12 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
During next 3-4 days I am planning to reinstall GoofyxGrid@home CPU to fix stability problem.

I will try to test both projects (NCI and CPU) on one hardware
18) Message boards : News : Server on destination place (Message 247)
Posted 8 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
ok, after many many many test I have one conclusion...
problem is that I just moved disk from old server to new one without reinstall....
so is mean i will have to reinstall my server, but I will do it in 3-4 weeks after unsent task will crunch
19) Message boards : News : Server on destination place (Message 246)
Posted 5 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
Small update:
I am sure that my mysql server has problems, but logs don't tell anythink about it <- but I have munin on board and i can see what is a situation. From time to time my mysql start running more that 100 process, every query beginning to be slow query and every mysql statistic has increasing.
Yesterday I decresing max_connection from 900 to 750 and thread_cache from 16 to 2.
20) Message boards : News : Server on destination place (Message 245)
Posted 3 Apr 2018 by Profile [BOINC@Poland]goofyx
Post:
Server is back to my test desk because is hang every 2-3 days.
I check every log in system and there are no errors.


Next 20


©2018 Goofyx Prodakszyn